Nonlinear optical characterization of phosphate glasses based on ZnO using the Z-scan technique

The nonlinear optical properties of a phosphate vitreous system [(ZnO)_x-(MgO)_30-x-(P₂ O₅)₇₀], where x=8, 10, 15, 18, and 20 mol% synthesized through the melt-quenching technique have been investigated by using the Z-scan technique. In the experiment, a continuous-wave laser with a wavelength of 405 nm was utilized to determine the sign and value of the nonlinear refractive (NLR) index and the absorption coefficient with closed and opened apertures of the Z-scan setup. The NLR index was found to increase with the ZnO concentration in the glass samples by an order of 10^-10 cm²·W^-1. The real and imaginary parts of the third-order nonlinear susceptibility were calculated by referring to the NLR index (n₂) and absorption coefficient (β) of the samples. The value of the third-order nonlinear susceptibility was presented by nonlinear refractive or absorptive behavior of phosphate glasses for proper utilization in nonlinear optical devices. Based on the measurement, the positive sign of the NLR index shows a self-focusing phenomenon. The figures of merit for each sample were calculated to judge the potential of phosphate glasses for application in optical switching.     

Effect of annealing treatment on the uniformity of CeO2/TiO2 bilayer resistive switching memory devices

Bilayer CeO₂/TiO₂ films with high-k dielectric property were prepared by rf magnetron sputtering technique at room temperature. Effect of annealing treatment on resistive switching (RS) properties of bilayer CeO₂/TiO₂ films in O₂ ambient at different temperature in the range of 350–550 °C was investigated. Our results revealed that the bilayer films had good interfacial property at 500 °C and this annealing temperature is optimum for different RS characteristics. Results showed that bilayer CeO₂/TiO₂ film perform better uniformity and reliability in resistive switching at intermediate temperature (i.e. 450 °C and 500 °C) instead of low and high annealing temperature (i.e. 350 °C and 550 °C) at which it exhibits poor crystalline structure with more amorphous background. Less Gibbs free energy of TiO₂ as compared to CeO₂ results in an easier re-oxidation of the filament through the oxygen exchange with TaN electrode. However, the excellent endurance property (>2500 cycles), data retentions (10⁵ s) and good cycle-to-cycle uniformity is observed only in 500 °C annealed devices. The plots of cumulative probability, essential memory parameter, show a good distribution of Set/Reset voltage.     

Heterogeneous Alkane Reactions over Nanoporous Catalysts

Pt-USY-712 (Si/Al = 6) and three SBA-15 catalysts (metal-loaded with 1 wt% Pt, 1 wt% Ni or 0.5 wt% Pt and 0.5 wt% Ni) were prepared and characterised using scanning electron microscopy (SEM), X-ray diffraction (XRD), N \(_{2}\) adsorption porosimetry / BET and transmission electron microscopy (TEM). The catalysts were then tested in the hydroisomerisation and hydrocracking of \(n\) -heptane using a micro-reactor at atmospheric pressure, and the products were analysed by GC-FID. Reaction temperatures ranged from 250– \(400\,\,^{\circ }\hbox {C}\) while the W/F values of \(n\hbox {-C}_{7}\) varied from 224.70–550.57 kg \(\hbox {mol}^{-1}\) . The coke content of each catalyst was measured using thermo gravimetric analysis (TGA). The catalytic activity was highest on Pt-USY-712 at the lowest reaction temperatures due to (a) the presence of strong Brønsted acids sites on the zeolite and (b) the smaller and more highly dispersed metal clusters on Pt-USY-712, relative to Pt-SBA-15. The activity was higher on the bimetallic Pt/Ni-SBA-15 than on mono-metallic Pt-SBA-15 as the co-impregnation of Ni with Pt enhanced the distribution of the metal clusters on the catalyst and resulted in improved surface area for reaction. The Pt-SBA-15 and Pt/Ni-SBA-15 catalysts both had the lowest and approximately equal coke percentages with 0.116 and 0.119 wt%, respectively.     

Light intensity and temperature dependence on performance of a photoelectrochemical cells of ITO/TiO<Subscript>2</Subscript>/PVC-LiClO<Subscript>4</Subscript>/graphite

The photovoltaic characteristics of a photoelectrochemical cell of ITO/TiO₂/PVC-LiClO₄/graphite are reported. This paper is concerned with the influence of light intensity and temperature on short-circuit current density, J_sc and open-circuit voltage, V_oc of the device. The photoelectrochemical cell material was a screen-printed layer of titanium dioxide onto an ITO-covered glass substrate, which was used as a working electrode of the cell. The solid electrolyte was polivinylchloride-lithium perchlorate. The graphite film serves as a counter electrode of the cell. The current density–voltage characteristics of the device under an illumination of 20, 40, 60, 80 and 100 mW cm⁻² light from a tungsten halogen lamp were recorded at 40 °C as well as under an illumination of 100 mW cm⁻² at 30, 35, 40, 45 and 50 °C, respectively. It was found that the short-circuit current density, J_sc of the device increases with both light intensity and temperature. The J_sc obtained at 100 mW cm⁻² was 1.0 μAcm⁻² and that at 50 °C was 0.7 μAcm⁻².     

Synthesis and characterization of a new conducting polymer composite

Organic conductive composite films have been synthesized by electropolymerization of pyrrole in the presence of chitosan and p-toluene sulfonic acid sodium salt. The obtained conductive polymer composite films have been characterized by Fourier Transform Infrared spectroscopy, dynamic mechanical analysis, scanning electron microscopy, X-ray diffraction and conductivity measurements. The prepared polymer composite films had the amorphous structure and exhibited the enhanced conductivity and mechanical properties due to the presence of chitosan in the composite films.     

Simultaneous determination of preservatives (benzoic acid, sorbic acid, methylparaben and propylparaben) in foodstuffs using high-performance liquid chromatography

A reversed-phased HPLC method that allows the separation and simultaneous determination of the preservatives benzoic (BA) and sorbic acids (SA), methyl- (MP) and propylparabens (PP) is described. The separations were effected by using an initial mobile phase of methanol-acetate buffer (pH 4.4) (35:65) to elute BA, SA and MP and changing the mobile phase composition to methanol-acetate buffer (pH 4.4) (50:50) thereafter. The detector wavelength was set at 254 nm. Under these conditions, separation of the four components was achieved in less than 23 min. Analytical characteristics of the separation such as limit of detection, limit of quantification, linear range and reproducibility were evaluated. The developed method was applied to the determination of 67 foodstuffs (mainly imported), comprising soft drinks, jams, sauces, canned fruits/vegetables, dried vegetables/fruits and others. The range of preservatives found were from not detected (nd)--1260, nd--1390, nd--44.8 and nd--221 mg kg(-1) for BA, SA, MP and PP, respectively.     

On the structures of X- and Y-type zeolites. Structural changes within the cavities of Na-X during dehydration

Samples of partially dehydrated and dehydrated Na-X were examined structurally by X-ray diffraction methods, revealing the progressive structural changes which occur as water is removed. In general, the total number of Na atoms in the small pore region remains unchanged by dehydration (ca. 18 per unit cell), as does the total number (non-mobile) in the 12-ring and site III regions (ca. 39). The site II population, however, is more than doubled by dehydration, from about 12 to about 25 Na, accounting for most of the loss from the mobile phase. The 12-ring sites, which in hydrated samples appear to comprise pairs of centrosymmetrically related [Na(H₂O)₂]⁺ units, rearrange during dehydration, with site III becoming an important location of Na atoms. At intermediate levels of dehydration, the remaining localized water molecules in the 12-ring region are found in a variety of associations with Na atoms, including perhaps as [Na(H₂O)₅]⁺ units whose Na atom occupies site III. In a sample containing H₃O⁺ ions as well as Na⁺ as counter ions, site II was found to have a very low occupancy.     

Synthesis of enantiomerically pure tertiary 1,2-aminoalcohols by the highly diastereoselective reductive ring opening of oxazolidines

A number of enantiomerically pure 1,2-aminoalcohols containing tertiary nitrogen atoms bearing chiral substituents have been prepared by highly diastereoselective reductive ring cleavage of oxazolidines derived from ketones and pseudoephedrine or ephedrine. The ring cleavage occurs with retention of configuration.